Do you know what are the components of a hydraulic cold press?

The beaded cold press can be said to be a kind of furniture making machinery equipment needed in the production of modern furniture, door sets, and decoration panels. It not only has many special application advantages such as good pressing quality, fast speed, high efficiency, but also simple operation and low repair rate, so it is more and more popular with work. However, if you want to further exert its good use advantages, you need to have a full understanding of the composition of the hydraulic cold press. Today, the hot press manufacturer will give us an overview of the components of the hydraulic cold press.

The composition of the beaded cold press:

Consists of: hydraulic system, electrical control system, pressure plate and body.

Oil pressure system: It is composed of oil cylinder, oil tank, oil pump, oil pump motor, control valve block and pressure gauge. The oil tank is filled with oil, and the oil pump is electrically driven by the oil pump to complete the pumping oil, and the oil is sent to the oil cylinder through the connecting oil pipe to make the oil cylinder work. The overflow valve can make the pressure part squeeze

Back pressure occurs during the pressing process, which has a smooth effect, electromagnetic ball. The valve is used to maintain the pressure set by the system, and the pressure gauge is used to display the pressure.

Electrical control system: It consists of a main circuit and a control circuit. Active circuit breakers, fuses, and AC contactors are used in the circuit to implement overload, short circuit, voltage loss and undervoltage protection for compressor motors, solenoid valves, etc.

Pressure plate balance organization: it consists of balance lifting rack, lifting gear, and rolling shaft. It consists of a fixed rolling bearing, and two left and right balance racks are mounted on the machine body. Lifting gears are fixed at both ends of the tumbling shaft, and both ends of the tumbling shaft are equipped with bearings, so that the tumbling shaft can be flexible

roll. When the pressure plate is raised and lowered, the lifting gear is not balanced with the rack? Close and roll, so that the pressure plate always maintains balance during the lifting process.

Pressure plate: It is composed of an upper pressure plate and a lower pressure plate. The upper and lower pressing plates are all welded by profiles and steel plates, and the working plane is averagely finished by a large gantry milling machine to ensure a smooth and lubricated working plane. The upper pressure plate is connected with the cylinder rod of the oil cylinder, and the lifting of the oil cylinder completes the pressure plate

Lift. The lower pressing plate is directly welded to the base of the fuselage. Make the structure of the whole machine tight.

Body: Welded with plate steel, compact structure and good strength.